1 vote
1
0
|
Hello Maksas,
If you want to solve this problem, follow these steps. 1. First, download and configuration of LG Drivers: https: //www.android ... 2. After download LG drivers, visit this link: http: // lg-phone-fir ... 3. Select the country you want and download .kdz. If the download does not start, simply replace the line "http://pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=" with the "http://csmgdl.lgmobile.com/dn/downloader .dev? fileKey = "no qoute. 4. Download LG Flash Tool 2014 hence the "http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG+Flash+Tool+2014.zip" 5. Unzip the file and place FlashTool2014.zip .kdz just retrieved in the same folder. 6. Turn off the phone and remove the battery. Connect the cable and press the volume button.Insert battery and do not release the button until you see the download mode - Software Update Screen. 7. Start FlashTool and view the file. Simply select CSE Flash and follow the instructions. (If you have problems, you must run it as XP Service Pack 3) (If there is any server error, etc., just ignore it and wait until the process is complete.) Additional references: https: //www.youtube ... If the problem persists, please let me know and I'll be more than willing to help. Sincerely, Christian |
0 votes
0
0
|
Hi Maksas,
If you unable to perform a factory data reset on your LG G2/G3 using the device settings for some reasons, you can try the hardware key method. Just follow the steps given below:
Regards, Lokesh |
0 votes
0
0
|
Thank you very much helped me the phone turns on but displays something like this: Unfortunately, the interface has been stopped.
or do you know what I mean? Comments Commented by
Christian Velasco
2016/06/30 08:51
Hello Maksas,
If the error "interface has been stopped", please read the following instructions to fix. 1. Turn off the phone . 2. Press and hold the following keys at the same time: Volume Down + Power key / lock buttons on the back of the phone. 3. Release the Power / Lock keyboard only when the LG logo is displayed, and then once again press and hold the Power / Lock. 4. Release all buttons when factory hard reset screen appears. 5. You should see the interface options, where you can select "Delete cache system", select this one. 6. Press the power button / lock the keyboard to continue Note: Removing the phone pose a threat. All of the operations you do at your own risk. If the problem persists, you can contact our support LG direct http: //www.lg.com/us ... Hope this helps! Sincerely, Christian Commented by
Christian Velasco
2016/07/01 09:02
You are very welcome.
I'm happy to help you. Christian Commented by
Sahit Sadono
2016/09/08 13:16
hello maksas, i have the same problem with you. Can you help me how to solve this problem ?
|
Required info can not be found.
and in that
Contact the system administrator ..
whether it is due to the fact that something was wrong?