-
ReviverSoft
Answers
Get Answers from our
Community of Computer Experts-
Home
-
Resources
-
Questions & Answers
- How to fix a problem with the firmware update and verification Boot fail !!
How to fix a problem with the firmware update and verification Boot fail !!
i like this question0 Like ItFollowafter phone reset error pops up
[580] -------------------------------------
[580]
[580] Boot verification fail !!
[580] - cause: MISMATCH_SIG_LEN
[580]
[580] ------------------------------------
I'm trying to fix it by pressing the vol + and at the same time by connecting to your computer via USB and gives me Downloadmode and soon turns Firmware update and not collected all the time is 0%. PS: I use the LG G4cOperating System:Uploaded files:
Answer this question
1 vote
10Hello Maksas,
If you want to solve this problem, follow these steps.
1. First, download and configuration of LG Drivers: https: //www.android ...
2. After download LG drivers, visit this link: http: // lg-phone-fir ...
3. Select the country you want and download .kdz. If the download does not start, simply replace the line "http://pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=" with the "http://csmgdl.lgmobile.com/dn/downloader .dev? fileKey = "no qoute.
4. Download LG Flash Tool 2014 hence the "http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG+Flash+Tool+2014.zip"
5. Unzip the file and place FlashTool2014.zip .kdz just retrieved in the same folder.
6. Turn off the phone and remove the battery. Connect the cable and press the volume button.Insert battery and do not release the button until you see the download mode - Software Update Screen.
7. Start FlashTool and view the file. Simply select CSE Flash and follow the instructions. (If you have problems, you must run it as XP Service Pack 3)
(If there is any server error, etc., just ignore it and wait until the process is complete.)
Additional references: https: //www.youtube ...
If the problem persists, please let me know and I'll be more than willing to help.
Sincerely,
Christian
0 votes
00Thank you very much helped me the phone turns on but displays something like this: Unfortunately, the interface has been stopped.
or do you know what I mean?CommentsCommented byChristian Velasco2016/06/30 08:51Hello Maksas,
If the error "interface has been stopped", please read the following instructions to fix.
1. Turn off the phone .
2. Press and hold the following keys at the same time: Volume Down + Power key / lock buttons on the back of the phone.
3. Release the Power / Lock keyboard only when the LG logo is displayed, and then once again press and hold the Power / Lock.
4. Release all buttons when factory hard reset screen appears.
5. You should see the interface options, where you can select "Delete cache system", select this one.
6. Press the power button / lock the keyboard to continue
Note: Removing the phone pose a threat. All of the operations you do at your own risk.
If the problem persists, you can contact our support LG direct http: //www.lg.com/us ...
Hope this helps!
Sincerely,
ChristianCommented byChristian Velasco2016/07/01 09:02You are very welcome.
I'm happy to help you.
ChristianCommented bySahit Sadono2016/09/08 13:16hello maksas, i have the same problem with you. Can you help me how to solve this problem ?
0 votes
00Hi Maksas,
If you unable to perform a factory data reset on your LG G2/G3 using the device settings for some reasons, you can try the hardware key method. Just follow the steps given below:- Turn off your LG G2/G3.
- Now press and hold the Power + Volume down buttons simultaneously for about 8 seconds.
- When the LG Logo appears, release and then immediately re-hold the Power button.
- Release the Power key as soon as you see the ‘FACTORY HARD RESET’ screen.
- Press the Power key to reset your device.
- Press the Power key again to confirm factory data reset.
- Wait till reset is done.
Regards,
Lokesh
Welcome to Reviversoft Answers
ReviverSoft Answers is a place to ask any question you have about your computer and have it answered by the expert community.Post your question
Ask your question to the community nowSimilar questions
I have had Driver Reviver since Jan 2013 and it just started giving me this error message today on October 6th, 2013.VIEW ANSWERS19Problemet började för ca 1 år sedan, har ominstallerat programmet utan resultat. Have reinstalled Excel without result.VIEW ANSWERS8Having trouble with your PC?Complete a free PC scan using Driver Reviver now.DownloadStart Free Scan -
Required info can not be found.
and in that
Contact the system administrator ..
whether it is due to the fact that something was wrong?