Hi Kian,

"System thread exception not handled" error usually arises due to incompatible or old graphics card drivers.

Solution: You can try fixing this issue by restarting the PC in safe mode, and then uninstalling the graphics driver which is causing this error. Once this is done, the latest driver of the installed graphics card must be downloaded from the vendor’s official site, and installed.

Here are the steps to perform the above solution.

1. Restart computer and insert Windows bootable media into optical media drive (CD/DVD Drive).
2. On the displayed Windows Setup box, click Next. On the next page, click Repair your computer.
3. On Choose an option screen, click Troubleshoot. On Troubleshoot screen, click Advanced options.
4. On Advanced options screen, click Command Prompt. On the opened Command Prompt window type C: and hit Enter.
5. On C: prompt, type BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY command, and press Enter to enable legacy advanced boot menu.
6. Once the command executed successfully, type EXIT command to close the Command Prompt window.

Now follow the below steps:

1. Restart Windows computer.
2. As the system restarts, press F8 key continuously to display the Advanced Boot Options screen.
3. On Advanced Boot Options screen, make sure that Safe Mode option is selected and press Enter key.
   
4. Log on to Windows computer with the account that has the elevated privileges.
5. Click Desktop tile from the Start screen to go to the desktop screen. Once on the desktop screen, hover mouse to the bottom right corner of the window.
6. From the displayed options, click Settings. On the Settings pane, click Control Panel.
7. On the opened All Control Panel Items window, click Device Manager. On Device Manager window, expand Display adapters category. Once expanded, right-click the graphics driver that is to be uninstalled.
8. From the context menu that appears, click Uninstall to remove the selected graphics driver. On Confirm Device Uninstall box, click OK to confirm.
9. Wait till the selected driver is uninstalled and restart the Windows computer if required in order to allow the changes to take effect.

I hope this helps in resolving this BSoD problem on your machine.

Regards,
Lokesh