Hi,

If you are not able to access the internet on Windows 10, there may be an issue with the VPN or the hardware components. So, try the below steps one by one to resolve this issue:

1. First, make sure Wi-Fi is set to On. Open Settings > Network & Internet > Wi-Fi and move the slider to the On position. Also make sure that the physical Wi-Fi button on your laptop is turned on.

2. Right-click on the Start button to open the WinX Menu. Select Device Manager. Click on the Action tab and select Scan for hardware changes.

This will refresh the list.

3. If Wi-Fi is not visible in list of networks then type 192.168.1.1 in the browser address bar, the address is to connect to your router. Under Wireless section of the configuration settings, see if there is an SSID and if the box against “Broadcast SSID” is checked. 
You may also change the SSID to something else and click on Save to make sure the SSID is visible in the list of networks being displayed when you click the network icon in the Windows 10 System Tray.

4. Power Cycle the Router

Remove the power plug from the router after turning it off. Leave it for few seconds, plug in the power cord, and turn it on. Check to see if the WiFi is now visible in the list of networks.

5. Use Windows Network Troubleshooter

You can use the built-in Windows Network Troubleshooter to see what is causing the problem and to fix it automatically.

1. To start Windows Network Troubleshooter, type Network Troubleshooter in the search box next to Start Button. 
2. Click on Identify and Repair Network Connections from the list that appears. 
3. That will start Windows Network Troubleshooter. The wizard will lead you through steps to troubleshoot the connection problem.

I hope this helps in connecting you to the internet.

Regards,
Lokesh